Brass Tap recommends beer, candy pairings for Halloween | 195-71-11461

ROUND ONE: Santos is an inch taller but Manuwa has three and a half inches of reach on him. They touch gloves to get us going. Body kick from Santos and he clips Manuwa with a right, then a left and Manuwa is hurt. Santos goes for a guillotine in transition then lands uppercuts in a clinch, knees go back and forth but Manuwa is holding a clinch buying himself time to recover. Manuwa misses a left as they break. More punches from Santos as Manuwa gets another clinch, he’s getting hurt when Santos touches him. Knee to the body from Manuwa. There’s a right in close from Manuwa then an elbow as they break. Both men land lefts and Santos kicks the body. Bit of a head kick then a left from Santos and he gets a takedown against the fence. Manuwa quickly wall walks and they’re fighting in the clinch again. Knees and elbows from Manuwa, his dirty boxing is superior and he lands knees and uppercuts, then Santos with a hail may left hook to stun Manuwa and we’re in the clinch again. This is sloppy but nuts. Manuwa with knees to the body, Santos lands one of his own. Knees to the thigh from Santos then an elbow from Santos on the break. Santos misses a wheel kick then they punch each other in the face a few times and clinch again. Manuwa with a wicked left hook on the break that wobbles Santos and he slips on a stupid spin kick then Manuwa looks to get on top. Santos with a loose triangle attempt, Manuwa postures through it and moves to the ride position and lands a few lefts as the round ends.

Both operators agreed that the stability, hydraulic power, and controllability the R 920 demonstrated in lifting exercises also served well when the machine was involved with dirt work: trenching, truck-loading, and doing front-shovel work.

This year, again, several chefs picked Smyth, Boka, Bad Hunter and others again as in previous years. We heard about Monteverde several times again, too, and then a brand new exciting restaurant, Pacific Standard Time, was the new pick of three different chefs.

The McLaughlin M-4500 series hydraulic boring attachments from McLaughlin Underground, Greenville, S.C., can produce bores up to 4.5 in. in diameter using a dry compaction boring method. The attachments can work with skid-steer loaders, compact track loaders, mini skid-steers and compact excavators. The attachments can bore up to 8 ft. per minute and at distances up to 100 ft., depending on soil conditions, and are available in four different configurations.

The Skinny: “The lamb and coriander dumplings at QXY are absolute heaven on a cold winter day — and there’s usually a line out the door, so you’ll need to warm up by the time you get them!”

Theoretically, this means you can catch an endless amount of Meltans and build a Hex Nut army. Or better yet, if the end of the new trailer “New Discovery: Rare Footage of Meltan in the Wild!” is suggesting what we think it is, you might be able to evolve Meltan if you collect enough of them. But we won’t know for sure until its arrival with Pokemon: Let’s Go, Pikachu and Let’s Go, Eevee.

Hiroshi Tanahashi & Kazuchika Okada will team up in the main event, pairing with KUSHIDA and Rocky Romero to take on Jay White, Back Luck Fale, Taiji Ishimori and Gedo.

21 Dec Faced with a crippling debt burden, Interserve has reached agreement in principal with its lenders on a way out. But some crucial points remain under debate.

Our newsletters cover the entire industry and only include the interests that you pick. Sign up and see.

Steel is important. The quality of the steel, the thickness of the steel and the manufacturing process are at the foundation of a good quality bucket. High-quality steel resists wear and lasts longer, increasing the lifespan and productivity of a bucket. Beyond the steel, there are design and reinforcement elements to look out for.

Ask for Discount on Ground Engaging Tools (GET) Market Report at: https://researchvector.com/2018/10/05/global-ground-engaging-tools-get-market-professional-survey-report-2018/

Using a wide bucket in hard material may also create extra wear and tear on the bucket and the pins on the machines, potentially causing downtime for the customer, Neal points out.