Caterpillar | Brass Lock Nut

“He looked at me and said, ‘Maury, are you with us or against us?’” Povich recalled. “That’s when I knew I had to get out of sports.”

The other quick coupler Doosan offers is a manual wedge lock coupler. “An operator will have to choose a bucket that is compatible with a wedge lock coupler,” says Smith. “There are specific, designated wedge lock buckets with a fitting that goes with the wedge lock coupler. Most operators that use a wedge lock coupler already have a line of wedge lock attachments to use with it. An advantage of the wedge lock coupler it that it does not lengthen the tip radius as much compared to the pin grabber coupler.”

“Do we keep these bots because we think they reflect public opinion at large? Or do we think that people are so simpleminded they let obvious bots tell them what to think?”

Compared to the non-hybrid SK210-10, the SK210HLC-10 provides fuel savings of up to 40 percent and a reduction in CO2 of up to 40 percent. But compared to the SK210-9, the hybrid also offers up to 15 percent greater productivity and more than 27 percent greater efficiency. (All comparisons using H, or hydraulic mode.)

Caterpillar has been getting a lot of attention for their new excavators, and rightfully so. When they introduced the 320 GC, 320 and 323 models last year, it had been 25 years since the last major redesign of the product – that would be 1992 – and they pulled out all the stops this time. Specifically, these three Next Generation models were built for digital connectivity, ease of use and semi-automated functionality.

Pin on style teeth are typically recommended, are easy to change, and are less likely to dislodge while in use. Regular inspection of these teeth is recommended. On a general-purpose tooth, if the flat is missing or worn back to the shank, it needs to be replaced.

A pallet that stores augers teeth up allows for inspection and replacement of worn teeth. Also, the coupler is down, so it can’t fill with water and freeze. Teeth up pallets, however, are generally limited to augers up to 15 in. in diameter as anything larger gets too heavy for one man to handle. Teeth down pallets, if properly designed, however, allow augers to be picked up or stored directly with the skid-steer or mini excavator.

These Hybrid guitars are a no-spray zone – the acrylic top, of course, needs no finish, while the wood body and neck are finished in numerous coats of Tru-Oil (just like Music Man has used for years on its fabulous necks). And, while some modern-style creations can feel as alien as they look, Leigh’s neck-work alone, based on Fender’s 648mm (25.5in) scale length, is superb, combining a mildly compound radius (254- 305mm) rosewood ’board with a ‘standard C’ profile, nicely rounded fingerboard edges and a silky smooth feel. Also, quite rarely, it is a bolt-on, using countersunk Allen-key bolts that locate into inserts in the neck. 

In the Marsh’s “A History of World War II: The D-Day Invasion to the Fall of Berlin,” solo performer John Fisher makes each cold number, each obscure officer or site name, each military stratagem into a one-man fireworks display. Whether you could nod along with references to German aircraft like the Focke-Wulf or you only vaguely remember names like Dunkirk, D-Day and the Battle of the Bulge from high school history class, Fisher makes his obsession with the second world war — and its representations in film and nonfiction — contagious, edifying and as theatrical as a circus.

“The sensitive mode was a plus when handling the barriers,” said Howard. “It’s an application where you really need smooth hydraulic response and ample hydraulic power. That mode would be helpful as well on sewer jobs, where you might be spreading stone or handling trench boxes. The machine has a lot of breakout force.”

Roy sighs. Once, The Daily Argus had fact-checkers, copy editors, legal advisers. Those people are gone now, and in their place there’s the Farm: a virtual machine populated with copies of a few trillion different bots.

For the record, you can’t be saved by the bell in MMA but the ref isn’t call it a finish. Same ref that missed those obviously illegal knees earlier. Mic time for Katona, he believes the fight should have been ruled a stoppage but says it’s not his call to make. He thanks Canada, then says he was hoping to make a statement in the division but hopes to make a better one in his next fight.