Nisbit mine progresses amid ban campaign | 195-71-11461

– Remove the rear wheel to gain access to the chain adjuster bolts. With the rear wheel off, this is also a good time to service the shock linkage!

The four-way dozer blade from McLaren Industries, Jacksonville, Fla., can be used for land clearing, grading, backfilling and ditchiwng. The attachment is available in 74, 84 and 96 in. and features a 19-in. blade face with a 3,000-psi hydraulic cylinder and 5,600-psi hydraulic line. The blade also contains a severe duty sub-frame.

Thompson Brothers has substantially reduced the time required to burn tree stumps and brush because of a Ransome Shark Tooth Model RST 150 stump splitter/harvester purchased from Ransome Attachments.

John Deere says the absolute and relative slope readouts provide enhanced information to the operator for specific applications, and the absolute value readout is useful for providing information during general grading applications that do not need a local grade reference. The relative value readout, the company says, is well suited for operators looking to alter grade relative to an existing or reference guide.

Trenching buckets — available in 12-, 16-, 18-, 20-, 24-, 30- and 36-in. (30.5, 40.6, 45.7, 50.8, 91, 76.2 and 91.4 cm) widths — feature a replaceable cutting edge, leaving a smooth work area when the job is completed. A toothed version also is available, which uses the same teeth as the previous bucket model so customers and dealers do not have to stock two types of teeth. Additionally, a scalloped cast side cutter has been added for improved durability and functionality.

There are several nuts and bolts on your bike that should be addressed before you ever ride your bike, as they will most likely come loose or seize eventually. If your bike has a plastic fuel tank, remove the bolts that attach the radiator shrouds and apply a light coat of grease to the bolts. This is to prevent the steel bolts from seizing inside the brass thread inserts in the tank. After months of power washing, these areas tend to seize up and this will cause the inserts to spin, rendering the shroud impossible to remove.

21 Dec Two major construction contracts with a combined value of almost AU$1.4bn (£780m) have been signed for the first stage of Parramatta Light Rail project in Sydney, Australia.

Labs are legendary for their greed, and I can confirm the instinct kicks in young. At feeding time, each one turns into a milk-seeking missile.

I also recently heard about the scientist who was shot and killed while tent camping with his two daughters at Malibu Creek State Park.

The Bobcat 15C direct-drive auger is designed to drill holes fast in softer to moderate soil conditions, such as sand, dry material and light dirt, and leave the hole cleaned out. It has a combination output shaft that allows for both hex and round bits. It is 10.6 inches wide and 37 inches long and can dig down to 62 inches without an extension. It can be used with certain Bobcat compact track and skid-steer loaders, excavators, Toolcat utility work machines and the V519 telescopic tool carrier.

The rest of the card is quietly solid as the all action Alex Oliveira battles Gunnar Nelson, Thiago Santos tries to continue his assault on the light heavyweight division, Olivier Aubin-Mercier takes on Gilbert Burns in what could be a sleeper bout for Fight of the Night honors, and Claudia Gadelha battles Nina Ansaroff for position in the strawweight division. Now it could turn out that these fights are duds in practice but on paper this is a solid offering.

Dry fretboards are not your friend. Rosewood and ebony fretboards are non-lacquered and require a bit of care to keep them sweet. Lemon oil is most commonly used to help re-moisten the fretboard as well as clean it. Let the oil soak in and it will stop the fretboard from shrinking or becoming brittle.