Oregon Contractor Requires Versatility in Limited Space | Brass Nut

“Have a welder repair it or maybe it’s time for a new bucket. Don’t let mud or other debris build up in this area or in the pin holes at the bottom of the coupler.”

They can accept six hammers with their skid-steer or mini excavator mounts installed. This allows the hammers to be loaded or unloaded directly on or off the pallet with the mini excavator  or skid-steer.

New standard features include a Werk Brau-compatible thumb bracket, a diverter valve for easy switching between a thumb or attachment, proportional control levers with two-way piping, pin-grabber style dual-locking quick coupler and O/C piping, enhanced bucket design with lifting-eye and two-piece tooth design for easy replacement, increased curve profile on dozer blade for better grade and cutting ability, an easily replaceable cutting edge to the dozer blade, a wider opening engine compartment, and a durable centered boom LED work light for improved jobsite illumination. A new optional feature is the 4-way angle dozer blade.

’80s Excess The CC’s body is built with a maple middle section sandwiched between mahogany wings. Our guitar came in an arresting pink sapphire finish that, combined with Caparison’s signature “Devil’s Tail” headstock and the fretboard’s clock inlays, elevates the guitar’s already ample ’80s-shred-machine aura.

Mark Gilbertson, president, Fargo RentAll, Fargo, N.D., says 75 percent of his company’s mini or walk-behind skid rentals include attachments.

The better storage solution is a hydraulic hammer pallet that consists of a base with tubes welded in a circular pattern. These tubes will accept up to a 3-in.-diameter tool, so they will handle most hammers used with skid-steers and mini excavators.

We’re out by the ring and we did the rehearsal where Matt Morgan, great big guy, came up and almost punked us. Someone went, “Is this gonna be a shoot?” I said, “I dunno man, be prepared for anything.” …[Morgan] goes, “Hey, nut shot me [during the brawl] and that’ll be the way I get outta there.” He didn’t have no problem with us, and a lot of them didn’t.

“Overall, I’d rate its digging performance as excellent. The pilot controls on this machine are very smooth and responsive, but have a bit of a different touch, compared with electro-hydraulic controls. It’s just a matter of initially adapting to the individual system when you first use the machine.”

A good example is with small to medium hydraulic hammers. Often, you see these attachments lying flat on the ground or on a pallet scattered around a rental yard. This can take up a lot of space and leave the hammers more vulnerable to potential damage.

The company says this on-board grade indication option provides operators with an accurate readout of the cross slope and main-fall slope of the machine. The company says the machine cross slope and main-fall slope information is displayed in real time through the machine’s main display monitor, and the readout can be easily configured to display either percentage or degrees depending on preference.

The 6600 standard brush Wolf model brush cutter from Abra Equipment Supply, Crosslake, Minn., features suction and high tempered steel blades to blast through brush and saplings up to 3 in. A balanced stump jumper protects the gearbox and prevents vibration. Galvanized 5/16-in. safety chains on the front and rear can protect against flying debris and aid in mulching.

Teachout, who was running against the establishment from the left back when “the resistance” still referred to World War II, supports nearly all of them, including Cynthia Nixon, who is mounting her own long-shot campaign for governor. They see themselves as harnessing the liberal anger at the Democratic establishment that has been bubbling throughout the country; the primary challengers, who are mostly women, and mostly women of color, are now running as a slate in the September primary.